HAMMER UNION PRESSURE GAUGE
Drilling Instrumentation
Acadiana Oilfield Instruments'
Hammer Pressure Gauge provides accurate reading for monitoring mud pump operations.Characteristics
- Manufactured Model #: CHPG - Series
- Operating Temp Limits: -54° to + 145°F
- Mounting: Vertical/Horizontal
- Characteristic: 1:1 Ratio
- Element Type: C-shaped Bourbon Tube
- Element Material: NI-Span C
- Housing Material: Aluminum
- Housing Enclosure Protection: Powder Coated
- Housing Scale: 360°
- Glass Type: Lexan
- Fill Fluid: Regal 32
- Chemical Seal Type: Diaphragm
- Chemical Seal Upper Lower: AI. Bronze & S/S
- Chemical Seal Material, Nuts and Bolts: S/S
- Fill Fluid: Univis J-13
- Capillary Length/Diameter: 10" / 3/16"
Applications
- Mud pumps
- Choke and kill manifolds
- Sandpipe pressue
- Blowout preventers
- Fracing, cementing and acidizing
Features
- 2" - 1502 mounting to accommodate manifolds, stand pipe, and blowout preventers
- Check valve included for fluid filling
- Pointer sensitivity regulated by the high pressure damper stem
- Available in standard, H2s, and salt water service that meet PSL3 certification
- Replaceable Buna or Viton diaphragm rubber for easy repair
Specifications
- Large 6" gauge dial face for easy pressure checks
- Gauge is filled with a clear hydraulic oil to reduce vibration on internal parts
- Accuracy: +/- 0.5%
- Custom ranges available upon request
- Metric equivalents in KPa, Bar, and kg/cm2 available
- Dual pressure readings also available upon request
Ordering Information
ASSEMBLY NUMBER Standard Service | ASSEMBLY NUMBER Sour Gas Service | MAX CAPACITY |
---|---|---|
CHPG-030 | CHPG-030-H | 3,000 PSI |
CHPG-050 | CHPG-050-H | 5,000 PSI |
CHPG-060 | CHPG-060-H | 6,000 PSI |
CHPG-100 | CHPG-100-H | 10,000 PSI |
CHPG-150 | N/A | 15,000 PSI |